Here's a good tip that I have trouble remembering.
Be careful how many projects you construct at once or you'll end up with things like this many metal parts to paint.
Attachment:
3_projects.jpg
| DIY Audio Projects Forum http://www.diyaudioprojects.com/Forum/ |
|
| Project Planning Tips http://www.diyaudioprojects.com/Forum/viewtopic.php?f=14&t=5082 |
Page 1 of 1 |
| Author: | Suncalc [ 24 Jan 2015, 20:23 ] |
| Post subject: | Project Planning Tips |
Here's a good tip that I have trouble remembering. Be careful how many projects you construct at once or you'll end up with things like this many metal parts to paint. Attachment: 3_projects.jpg
|
|
| Author: | Geek [ 24 Jan 2015, 22:56 ] |
| Post subject: | Re: Project Planning Tips |
Nice problem to have, though  Looking forward to the finished projects! 
|
|
| Author: | M. Gregg [ 21 May 2016, 10:53 ] |
| Post subject: | Re: Project Planning Tips |
I plan a project, By laying out the components on a piece of cardboard. I rearrange everything until I'm happy then cut the cardboard to size and try it again once I have the size for the base plate I then draw the box out on a piece of paper then make them out of card and tape it all together then put the components back in and double check everything before cutting any metal or wood. Obviously you can use CAD but if you are a DIY guy/gal then you might have to improvise.  Regards M. Gregg |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|