DIY Audio Projects Forum
http://www.diyaudioprojects.com/Forum/

Oddblock octal with Alpair 10p speakers in FHXL enclosures
http://www.diyaudioprojects.com/Forum/viewtopic.php?f=9&t=6641
Page 2 of 2

Author:  Trackhappy [ 06 Nov 2019, 14:30 ]
Post subject:  Re: Oddblock octal with Alpair 10p speakers in FHXL enclosur

So, I took another look at the setup. I had used the 3.5mm output from the DAC because that was the cable I had. I changed to the RCA connectors today and it made a huge difference. I also changed to the 4 ohm taps, but that really didn't make much difference. Bruce has very kindly sent me the article or the Groovewatt, which I will study carefully, but in the meantime, at his suggestion I will change focus to the Forewatt pre-amp. It seems that ECC802S are not readily available here (Australia) so I will have to work on that, but in the meantime plan the chassis and get the rest of the components going. I will do some listening tests with the Oddblock stereo connected to the FHXL's, but as I am not an expert and my source is suspect until I build the Forewatt, they may not be all that authoritative.
Thanks all.
Glenn (Brisbane)

Page 2 of 2 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/